Siemens Gigaset SX541 WLAN dsl Manual Download

Page: 60 / 187

Basic Setup Wizard

Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_router.fm / 21.07.2005

hablone 2005_05_02

Leave the default settings for the parameters

SIP listen port

Proxy server port

Registrar server port

and

Voice codecs

unless you have been given other data by

your service provider.

Confirm your selection with

Next >

Summary

The basic settings you have made through the wizard are shown for you to check in the
next step.

If you want to make changes to the settings, click

< Back

If you want to confirm the settings, click

Finish

to close the basic setup wizard.

You will then be taken automatically to the start screen for the

Security Setup Wizard

If you want to carry this out at a later stage, deactivate the option

I would like to run

the Security Setup Wizard now.

The Gigaset SX541 WLAN dsl is now configured and ready to connect to the Internet.

Summary of Contents for Gigaset SX541 WLAN dsl




























































































































































































Search results

Summary of Contents for Gigaset SX541 WLAN dsl

Reviews:

Related manuals for Gigaset SX541 WLAN dsl

Brands by name

Popular brands

Siemens Gigaset SX541 WLAN dsl, Manual

Search results

Summary of Contents for Gigaset SX541 WLAN dsl

Reviews:

Related manuals for Gigaset SX541 WLAN dsl

Brands by name

Popular brands