Siemens Gigaset SX303isdn User Manual Download Page 21

Page: 21 / 183

Preparing the base station for use

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005

If your connection does not support this feature, you have to enter the MSNs manually.

The MSNs entered are automatically assigned to all registered handsets as receive

MSNs. MSN1 is automatically assigned to all handsets as the send MSN.
This procedure is repeated for MSN2 to MSN9 and for MSN0.

Set the device type:

The display shows:

Set device type?

If you have connected an analogue device to your base station, select

YES

The display shows:

Set device type for Int.21?

, select

YES

Select the relevant device type and confirm with

(

‰

= on). The following settings

are possible (Setting the device type, page 132).

Briefly

press the exit menu key

to continue.

Setting the receive MSN

The display shows:

Set incoming MSN?

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the prompt.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the

MSN1 MSN %f?

prompt.

Enter name

Entering a name for an MSN is optional.

s ~

If necessary, scroll to the line

<Number>

and enter

the MSN

If the MSNs were found automatically, the

numbers will already be entered.

Press the display key to open the submenu.

Save entry

Select the menu item and confirm.

◆

Telephone

see Page 130, Connecting telephones

◆

Fax

see Page 130, Connecting a fax machine

◆

Modem

see Page 130, Connecting a modem

◆

Answering mach.

see Page 131, Connecting an answering machine

◆

Neutral

see Page 131, Connecting a fax machine

◆

Door type1

see Page 140, Setting up the entrance telephone

◆

Doortype2(DTMF)

see Page 140, Setting up the entrance telephone

◆

Ext. music/hold

see Page 131, Importing a waiting melody from an external

device

◆

No function

see Page 131, No device connected

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands