background image

6

The Gigaset SE551 WLAN dsl/cable

Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / introduction.fm / 25.10.2006

Sc

hablone 2

004_

12_2

7

The Gigaset SE551 WLAN dsl/cable

Your Siemens Gigaset SE551 WLAN dsl/cable is a powerful but easily operated device for 
connecting your PC (WLAN) or your local network (

LAN

) tthe 

Internet

 without the 

need for wires (via a 

DSL

 or cable modem). 

You can connect your PC wirelessly to the Gigaset SE551 WLAN dsl/cable and create a 
wireless local network (

WLAN

). Thanks to Super G technology the transfer rate within 

the local wireless network achieves up to 108 Mbps. For network security, wireless 
transmission can be encrypted using the WPA standard or 64/128-bit WEP.

The Gigaset SE551 WLAN dsl/cable allows several users to access the Internet simulta-
neously. A single user account can be shared if your 

Internet Provider

 permits this. 

If you want to surf the Internet at the lowest possible cost, then the Gigaset SE551 
WLAN dsl/cable is a convenient and effective solution.
You can connect a 

DSL

 or cable modem to the WAN interface of your Gigaset SE551 

WLAN dsl/cable. 
Despite its extensive range of functions, the Gigaset SE551 WLAN dsl/cable is simple to 
handle. It can be configured and operational within a few minutes.

Summary of Contents for gigaset SE551
















































































































































































Reviews: