Siemens gigaset SE551 Owner'S Manual Download

Page: 62 / 175

Basic Setup Wizard

Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / configure_router.fm / 25.10.2006

hablone 2

004_

12_2

Summary

In the next step the basic settings you have made through the wizard are shown for you
to check.

If you want to make changes to the settings, click on

< Back

If you want to confirm the settings, click on

Finish

to close the basic setup wizard.

You will then be taken automatically to the start screen for the

Security Setup Wizard

If you want to carry this out at a later stage, deactivate the option

I would like to run

the Security Setup Wizard now.

The Gigaset SE551 WLAN dsl/cable is now configured and ready to connect to the Inter-
net.

Summary of Contents for gigaset SE551
















































































































































































Search results

Summary of Contents for gigaset SE551

Reviews:

Related manuals for gigaset SE551

Brands by name

Popular brands

Siemens gigaset SE551, Owner'S Manual

Search results

Summary of Contents for gigaset SE551

Reviews:

Related manuals for gigaset SE551

Brands by name

Popular brands