Siemens Gigaset S810 User Manual Download

Page: 83 / 100

Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / appendix.fm / 18.03.2011

rsion 4.1, 21

.11.2007

Questions and answers

If you have any questions about the use of
your phone, you can contact us 24/7 at
www.gigaset.com/service.
The table below contains a list of common
problems and possible solutions.

Registration or connection problems with a
Bluetooth headset.

Reset the Bluetooth headset (see the user
guide for your headset).

Delete registration data from the handset
when deregistering the device (

page 68).

Repeat the registration process (

page 68).

The display is blank.

1. The handset is not switched on.

Press and

hold

the end call key

2. The battery is empty.

Charge the battery or replace it
(

page 14).

Not all menu items are displayed.

The menu display is restricted (

standard mode

Activate extended menu display
(

expert mode

•

) (

page 28).

No Base

flashes on the display.

1. The handset is outside the range of the base.

Move the handset closer to the base.

2. The base's range is reduced because

Eco Mode is activated.

Deactivate Eco Mode (

page 59) or

reduce the distance between the handset
and the base.

3. The base is not switched on.

Check the base power adapter
(

page 12).

Please register handset

flashes on the display.

Handset has not been registered with the base or
has been deregistered.

page 62).

Handset does not ring.

1. The ringtone is deactivated.

Activate the ringtone (

page 73).

2. Call divert set for "

All Calls

Deactivate call divert (

page 36).

3. The phone only rings if the phone number

has been transferred.

Switch on the ringtone for unknown calls
(

page 73).

You cannot hear a ringtone/dialling tone from
the fixed line network.

The phone cord supplied has not been used or
has been replaced by a new cord with the wrong
pin connections.

Please always use the phone cord supplied or
ensure that the pin connections are correct
when purchasing from a retailer
(

page 12).

The connection always terminates after
approx. 30 seconds.

Repeater activated/deactivated (

page 76).

Activate/deactivate the handset
(

page 25).

Error tone sounds after system PIN prompt.

You have entered the wrong system PIN.

Reset the system PIN to 0000 (

page 77).

Forgotten the system PIN.

Reset the system PIN to 0000 (

page 77).

The other party cannot hear you.

You have pressed the mute button

. The

handset is "muted".

Reactivate the microphone (

page 34).

The number of the caller is not displayed
despite CLIP.

Calling Line Identification is not enabled.

The caller

should ask the network provider to

enable Calling Line Identification (CLI).

You hear an error tone when keying an input

descending tone sequence).

Action has failed/invalid input.

Repeat the operation.
Watch the display and refer to the user guide
if necessary.

You cannot listen to messages on the network
mailbox.

Your PABX is set for pulse dialling.

Set your PABX to tone dialling.

Summary of Contents for Gigaset S810





































































































Search results

Summary of Contents for Gigaset S810

Reviews:

Related manuals for Gigaset S810

Brands by name

Popular brands

Siemens Gigaset S810, User Manual

Search results

Summary of Contents for Gigaset S810

Reviews:

Related manuals for Gigaset S810

Brands by name

Popular brands