41
Handset settings
Gigaset S440-445 / IM-engl / A31008-M1625-R101-1-3T19 / settings_bs_hs.fm / 17.12.2004
Activating/deactivating
auto answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key
c
.
v
¢
Ð
¢
Handset
Auto Answer
Select and press
§OK§
(
‰
= on).
a
Press
and
hold
(idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during an external call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Open menu.
r
Select
volume.
§Save§
Press display key if necessary
to save the setting perma-
nently.
If
t
is assigned a different function,
e.g. when toggling (page 17):
v
Open menu.
Volume
Select and press
§OK§
.
Configure setting (see above).
Changing ringtones
u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 =
ˆ
) and
the "Crescendo" ring (6; volume
increases with each ring =
‰
).
u
Ringtones:
You can select any sound from the
Sound Manager (page 42).
You can configure the following functions
with different ringtones:
u
Ext. Calls
: For external calls
u
Internal Calls
: For internal calls
u
Appointments
: For set appointments
u
Alarm
: For a pre-set wake-up call
u
All
: The same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of ringing. For external calls, you
can choose to have the name of the caller
announced. This requires the correspond-
ing voice pattern to be recorded before-
v
¢
ï
¢
Ringer Settings
q
Select setting, e.g.
Ext. Calls
,
and press
§OK§
.
r
Set volume (1–6).
s
Jump to the next line.
r
Select melody.
r
Activate or deactivate
Announce
.
Requirement:
Call-
ing Line Identification
¤
Save changes (page 11).
In idle status, you can also open the menu
Ringer Settings
by pressing
t
briefly
.
