Siemens Gigaset S430 User Manual Download

Page: 38 / 60

Handset settings

Gigaset S430 / HGK-Taiwan-engl / A31008-M1625-Z201-1-7619 / settings_bs_hs.fm / 18.01.2005

Changing ringtones

Volume:
You can choose between five volumes

(1–5; e.g. volume 2 =

) and

the "Crescendo" ring (6; volume

increases with each ring =

‰

Ringtones:
You can select any sound from the

Sound Manager (page 36).

You can configure the following functions

with different ringtones:

Ext. Calls

: For external calls

Internal Calls

: For internal calls

Appointments

: For set appointments

(page 37)

Alarm

: For a pre-set wake-up call

(page 37)

All

: The same for all functions

Settings for individual functions

Set the volume and melody depending on

the type of ringing. For external calls, you

can choose to have the name of the caller

announced. This requires the correspond-

ing voice pattern to be recorded before-

hand (page 17).

Ringer Settings

Select setting, e.g.

Ext. Calls

and press

§OK§

Set volume (1–6).

Jump to the next line.

Select melody.

Activate or deactivate

Announce

Requirement:

Call-

ing Line Identification

Save changes (page 11).

In idle status, you can also open the menu

Ringer Settings

by pressing

briefly

Same settings for all functions

Ringer Settings

All

Set volume and ringtone (see "Settings

for individual functions").

§Yes§

Press the display key to con-

firm the prompt.

Press

and

hold

(idle status).

Activating/deactivating the ringtone

You can deactivate the ringer on your

handset before you answer a call or when

the handset is in idle status; the ringer can

be deactivated permanently or just for the

current call. The ringtone cannot be re-

activated while an external call is in

progress.

Deactivating the ringtone permanently

Press the star key and hold

until you can no longer hear

the ringtone.

The

icon appears in the display.

Re-activating the ringtone

Press and

hold

the star key.

Deactivating the ringtone for the current

call

§Silence§

Press the display key.

Activating/deactivating the alert tone

Instead of a ringtone, you can activate an

alert tone. When you get a call, you will

hear

a short tone

("Beep") instead of the

ringtone.

Press and

hold

the star key

and

within 3 seconds:

§Beep on§

Press the display key. A call is

now signalled by

one

brief

alert tone. You will now see

in the display.

Summary of Contents for Gigaset S430





























































Search results

Summary of Contents for Gigaset S430

Reviews:

Related manuals for Gigaset S430

Brands by name

Popular brands

Siemens Gigaset S430, User Manual

Search results

Summary of Contents for Gigaset S430

Reviews:

Related manuals for Gigaset S430

Brands by name

Popular brands