Siemens Gigaset M1 professional User Manual Download Page 18

Page: 18 / 76

GSM M1 Module, English: A24859-N4000-A100-1-7677

gsm-m1-e.fm

Technical reference section

6.3.96

• The <CR> character can be followed by a <LF> character but this character will be

ignored by the GSM module.

Sample command lines:

ATH

ATS7?Q0E1

ATD0123456789

• When making corrections, use the Backspace key or Ctrl-H to delete the character

to the left of the cursor.

• The command line is not executed until the <CR> character is received.

The AT&F and AT&V commands allow you to load and display the factory configuration.

Enter:

AT&F0

M1 returns:

Enter:

AT&V

M1:

Loads the factory configuration and transfers it to the PC.
The settings are displayed on the screen.

The GSM module acknowledges all commands.

Example:

Enter:

AT&F0

M1 returns:

The ATVn command allows you to determine whether result codes will appear as al-
phanumeric text or a numerical code:

Loading the factory configuration and displaying a configuration

ATVn - Result codes

ATVn

[n=0,1]

Option

Result

ATV0

Selects the short result code format (digits). Useful if the GSM module is
to be controlled from the computer using a communication program.

ATV1

Selects the long result code format. Factory configuration.

Summary of Contents for Gigaset M1 professional













































































Search results

Summary of Contents for Gigaset M1 professional

Reviews:

Related manuals for Gigaset M1 professional

Brands by name

Popular brands

Siemens Gigaset M1 professional, User Manual

Search results

Summary of Contents for Gigaset M1 professional

Reviews:

Related manuals for Gigaset M1 professional

Brands by name

Popular brands