Siemens Gigaset M1 professional User Manual Download Page 13

Page: 13 / 76

gsm-m1-e.fm

GSM M1 Module, English: A24859-N4000-A100-1-7677

Installation / startup

26.2.96

A number of factors can prevent connection setup.

• No SIM card in the module.

• The PIN or another block is not unblocked.

• The GSM data module is not registered, i.e. it has not or has not yet been able to

• The M1 was manually set to an unavailable network operator by means of

+COPS=1.

• The M1 was signed off of the network by means of +COPS=2.

• Invalid characters in the dial string.

• Dial string contains more than 30 characters.

• Command line contains more than 39 characters.

• A connection is already set up.

• The call is not answered within 60 seconds after dialing because the distant station:

– is not ready,
– is not a modem,
– does not support the selected operating mode.
The GSM module returns

NO CARRIER

• The distant station is busy. The GSM module returns

BUSY

• Before the connection can be set up, the GSM module receives a signal from the

computer and returns

NO CARRIER

. If no connection is set up, the GSM module

goes on-hook and returns to command mode.

• The GSM network does not or does not yet support the fax/data modes. The GSM

module returns

NO CARRIER

• The GSM module is not

registered in

the GSM network. It returns

NO DIALTONE

• You have manually dialed a forbidden network operator; the radio modem no longer

registers.

Connection cannot be set up

Own errors

System errors

Summary of Contents for Gigaset M1 professional













































































Search results

Summary of Contents for Gigaset M1 professional

Reviews:

Related manuals for Gigaset M1 professional

Brands by name

Popular brands

Siemens Gigaset M1 professional, User Manual

Search results

Summary of Contents for Gigaset M1 professional

Reviews:

Related manuals for Gigaset M1 professional

Brands by name

Popular brands