euroset 5015 / EU ger-eng-cre-slov / A30350-M208-D801-3-Z419 / 5015.fm / 14.03.2006
8
IRL
Dialling tone audible but telephone will not dial:
The connection is OK. Is the dialling mode set correctly
PABX only: No connection or incorrect connection when
dialling from memory (e.g. redial, speed dial):
Program external line prefixe.
The other party cannot hear you:
Have you pressed the
Mute key? Press the key again. Is the plug from the handset
cord inserted correctly?
Recall key does not work:
Set appropriate flash time.
Insert strips
Blank insert strips for the repertory keys can be found on the
Internet at http://www.siemens.com/euroset.
Contacts
If you should encounter any problems when operating the
telephone connected to a communication system with
analogue network access, please contact the network
operator responsible or your dealer.
Authorisation
This device is intended for analogue phone lines in your net-
work.
Country-specific requirements have been taken into consid-
eration.
We, Siemens Home and Office Communication Devices
GmbH & Co. KG, declare that this device meets the essential
requirements and other relevant regulations laid down in
Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is availa-
ble at this Internet address:
http://www.siemens.com/gigasetdocs.
Guarantee Certificate
Without prejudice to any claim the user (customer) may
have in relation to the dealer or retailer, the customer shall
be granted a manufacturer’s Guarantee under the condi-
tions set out below:
◆
In the case of new devices and their components exhib-
iting defects resulting from manufacturing and/or mate-
rial faults within 24 months of purchase, Siemens shall,
at its own option and free of charge, either replace the
device with another device reflecting the current state of
the art, or repair the said device. In respect of parts sub-
ject to wear and tear (including but not limited to, batter-
ies, keypads, casing), this warranty shall be valid for six
months from the date of purchase.
◆
This Guarantee shall be invalid if the device defect is
attributable to improper care or use and/or failure to
comply with information contained in the user manuals.
In particular claims under the Guarantee cannot be
made if:
◆
The device is opened (this is classed as third party inter-
vention)
◆
Repairs or other work done by persons not authorised by
Siemens.
◆
Components on the printed circuit board are manipu-
lated
◆
The software is manipulated
◆
Defects or damage caused by dropping, breaking, light-
ning or ingress of moisture. This also applies if defects or
damage was caused by mechanical, chemical, radio
interference or thermal factors (e.g.: microwave, sauna
etc.)
◆
Devices fitted with accessories not authorised by Sie-
mens
◆
This Guarantee shall not apply to or extend to services
performed by the authorised dealer or the customer
themselves (e.g. installation, configuration, software
downloads). User manuals and any software supplied on
a separate data medium shall be excluded from the
Guarantee.
◆
The purchase receipt, together with the date of pur-
chase, shall be required as evidence for invoking the
Guarantee. Claims under the Guarantee must be submit-
ted within two months of the Guarantee default becom-
ing evident.
◆
Ownership of devices or components replaced by and
returned to Siemens shall vest in Siemens.
