67
Appendix
Gigaset E 150 / englisch / A31008-S250-B102-1-7619 / appendix.fm / 10.11.2004
… *--*--* flashes in
the display?
The handset is out-
side the range of the
base.
The base is not
switched on.
The handset is not
registered.
Move the handset
nearer to the base.
Check the power
connector at the
base (page 12).
Register the hand-
set.
… (when using
more than one
handset) the hand-
set that is in the
base does not
charge?
The base will not
charge the handset if
telephoning is simul-
taneously in progress.
Use an additional
charger.
… the handset or
the base does not
ring?
The ringer is switched
off.
Switch on the ringer
in the handset
… I can hear no
ringer tone/dial
tone?
You have changed the
telephone cord on
your Gigaset.
When purchasing a
new cord ensure
that it has the cor-
rect pin connections
… the incoming call
number is not dis-
played even though
CLIP is set?
Calling line identifica-
tion is not enabled.
The
caller
should
ask his network pro-
vider to enable the
identification of his
number (CLI).
… I hear an error
tone (falling tone
sequence) when
keying an input?
The action has failed
or the input is incor-
rect.
Repeat the proce-
dure; watch the dis-
play and if necessary
refer to the operat-
ing instructions.
… the calls list does
not indicate a time
for a message?
Date/time are not set. Set the date/time
What has hap-
pened when …
Possible Cause
Possible solution
