3
AL14H / EN-Master / A31008-M2050-R101-1-6Z19 / AL14H_EN.fm / 12.11.2008
Registering the handset
You must initiate handset registration on the hand-
set and on the base station.
Once it has been registered, the handset returns to
idle status. If several handsets are registered to the
base station, the internal number is shown in the
top left of the display after registration, e.g.
2
.
If the internal numbers 1 to 4 have already been
assigned (four handsets have already been registe-
red), handset number four is deregistered and
overwritten.
On the base station
To find out how to register the handset on the base
station, see the user guide for the base station.
On the handset
MENU
¢
Settings
¢
OK
¢
Handset
¢
OK
¢
Register HS
¢
Enter the base station system
PIN (default setting: 0000)
¢
OK
.
Registering
flashes in the display.
Registration takes approx. 1 minute.
Charging the battery pack
Plug the mains unit for the charging cradle into the
socket and place the handset in the charging cradle
with the
display facing forward
.
To charge the battery pack, leave the handset in
the base station for approx. 7 hours. The battery
pack is now fully charged. The charge status of the
battery pack is only correctly displayed after unin-
terrupted charging/discharging. Therefore you
should not interrupt the charging process.
Charging is electronically controlled to prevent
overcharging. The battery pack heats up during
charging. This is normal and not dangerous. After
a while its charge capacity will decrease for techni-
cal reasons.
You must set the date and time to ensure that the
times of calls are logged correctly (see Menu tree
page 8).
Once the phone is registered and the time set, the
idle display looks as shown on page 1.
If you have any questions about using your phone,
please read the tips on troubleshooting ("Ques-
tions and answers", page 6) or contact our cus-
tomer service department (page 7).
Activating/deactivating the handset
Press and
hold
the end call key
a
.
If you place a deactivated handset into the charg-
ing cradle, it will automatically activate itself.
Making calls
Making external calls and ending calls
External calls are calls using the public telephone
network.
~
(Enter the phone number)
¢
c
.
The number is dialled. (Or you can
first
press and
hold
c
[dial tone] and then enter the number.)
During the call you can adjust the earpiece volume
using
t
.
End the call/cancel dialling:
Press the end call key
a
.
You can automatically insert a network provider
dialling code before any phone number (see
"Preselection" Menu tree, page 8).
Accepting a call
The handset indicates an incoming call by ringing
and by a display on the screen.
Press the talk key
c
to accept the call.
When
Auto Answer
is activated (see Menu tree,
page 8), simply remove the handset from the base
station/charging cradle.
Please note:
You can also
automatically
register the Gigaset
AL14H handset to the Gigaset AL140/AL145 base
station.
Precondition:
The handset is not registe-
red to a base station. Place the handset in the
charging cradle of the base station with its
dis-
play facing forward
. You will hear a confirmation
tone. Leave the handset in the base station until it
is registered.
