Siemens Gigaset A580 IP Manual Download Page 73

Page: 73 / 212

SMS (text messages)

Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / sms_BRD_neutral.fm / 24.03.2010

rsion 8, 03.0

.2008

Reading or deleting individual SMS messages

Opening draft message list.

Select SMS.

§Menu§

Read SMS

Select and press

§OK§

to read the SMS. Scroll through the SMS using

Or:

§Menu§

Delete Entry

Select and press

§OK§

to delete the SMS.

Writing/editing an SMS

You are reading an SMS in the draft message list.

§Menu§

Press the display key.

You have the following options:

Write Message

Write and then send or save a new SMS.

Use text

Edit the text of the stored SMS and then send it.

Deleting draft message list

Open the draft message list.

§Menu§

Delete List

Select and press

§OK§

Press the display key to confirm the delete. The list is cleared.

Press

and

hold

(idle status).

Summary of Contents for Gigaset A580 IP





















































































































































































































Search results

Summary of Contents for Gigaset A580 IP

Reviews:

Related manuals for Gigaset A580 IP

Brands by name

Popular brands

Siemens Gigaset A580 IP, Manual

Search results

Summary of Contents for Gigaset A580 IP

Reviews:

Related manuals for Gigaset A580 IP

Brands by name

Popular brands