Siemens Gigaset A580 IP Manual Download Page 61

Page: 61 / 212

Network services

Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / netservices_SAG.fm / 24.03.2010

rsion 8, 03.0

.2008

If the participant does not answer:

Press the display key

§End§

, to return to the waiting call.

If the participant answers, you have the following options:

Toggling:

Use

to swap between the participants.

End call with active participant:

§Menu§

End Active Call

Press the end call key

, to end the current call. The participant who was

previously waiting will automatically call you back.

Conference call:

Talk to both participants:

§Menu§

Conference Call

End conference call (toggle):

§Menu§

End Conference

End call with both participants: press the end call key

Call transfer (provider-dependent):

You can connect the two external participants.

Preconditions:

– You are toggling calls and you phoned the participant currently active your-

self.

– You have activated call forwarding via the Web configurator (

Page 145

Depending on the setting in the Web configurator (

Page 145

Press the end call key

Or:

Press the

key.

If call forwarding was successful, a message will appear to this effect.
The handset will then switch to idle.
If call forwarding was not successful, the participant who was previously waiting
will call you back.

Accepting a waiting call

Precondition

: Call waiting is activated (

Page 59

§Menu§

Accept Call Waiting

You have the option of toggling or holding a conference call.

Rejecting a waiting call

§Menu§

Reject Call Waiting

The caller hears the busy tone.

Please note

If the first call was an internal call, the internal connection is ended.

An internal, waiting call is shown on the display. You can neither accept the
internal call nor reject it.

If an SMS is received, you will hear a call waiting tone (without screen display).

Summary of Contents for Gigaset A580 IP





















































































































































































































Search results

Summary of Contents for Gigaset A580 IP

Reviews:

Related manuals for Gigaset A580 IP

Brands by name

Popular brands

Siemens Gigaset A580 IP, Manual

Search results

Summary of Contents for Gigaset A580 IP

Reviews:

Related manuals for Gigaset A580 IP

Brands by name

Popular brands