Siemens Gigaset A580 IP Manual Download Page 33

Page: 33 / 212

Operating the handset

Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / starting.fm / 24.03.2010

rsion 8, 03.0

.2008

Keys on the keypad

etc.

Press the matching key on the handset.

Enter digits or letters.

Correcting incorrect entries

You can correct incorrect characters in the text by navigating to the incorrect entry
using the control key. You can then:

Press

to delete the character to the left of the cursor

Insert characters to the left of the cursor

Overwrite the (flashing) character when entering the time and date etc.

Menu guidance

Your telephone's functions are accessed using a menu that has a number of levels.

Main menu (first menu level)

When the handset is in idle status, press

§Menu§

to open the main menu.

The main menu functions are shown on the display as a list with name and icon.

To access a function, i.e. to open the corresponding submenu (next menu level):

Navigate to the function using the control key

. Press the display key

§OK§

Submenus

The functions in the submenus are displayed as lists.

To access a function:

Scroll to the function with the control key

and press

§OK§

Or:

Enter the corresponding digit combination (

Page 35

Briefly

press the end call key

once to return to the previous menu level/cancel

the operation.

Reverting to idle status

You can revert to idle status from anywhere in the menu as follows:

Press and

hold

the end call key

Or:

Do not press any key: after 2 minutes the display will

automatically

revert to idle

status.

Any settings you have not confirmed by pressing

§OK§

will be discarded.

An example of the display in idle status is shown on

Page 27

Summary of Contents for Gigaset A580 IP





















































































































































































































Search results

Summary of Contents for Gigaset A580 IP

Reviews:

Related manuals for Gigaset A580 IP

Brands by name

Popular brands

Siemens Gigaset A580 IP, Manual

Search results

Summary of Contents for Gigaset A580 IP

Reviews:

Related manuals for Gigaset A580 IP

Brands by name

Popular brands