Siemens Gigaset 4010 Classic Operating Instructions Manual Download Page 41

Page: 41 / 69

Press keys:

Registering and de-registering handsets

Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619

mobilt_an.fm

11.06.01

Registering Gigaset 2000/3000 handsets
and non-Siemens handsets at the
Gigaset 4010 base station

Prerequisite:

The non-Siemens handsets must also comply with the

GAP standard

However, it is possible that not all functions will be
available on your handset!

Step 1:

After registration, your Siemens base station assigns
the

first unassigned

internal number to the handset.

Step 2:

Underside of the
base station

Press the key on the underside of the base station
briefly
A signal tone is generated at the base station.

De-registering handsets

Prerequisite:

You can only de-register handsets with a Gigaset 4000.

NNNNNNN

Press the display key.
The list of internal users is displayed.

NNNNNNN NNNNNNN

Select the handset to be de-registered.

NNNNNNNNNNNN

Open the menu.

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

DE-REG H/SET

Select the menu item and confirm

is dis-

played.

NNNNNNN

Enter the 4-digit system PIN (factory setting: 0000) and
confirm.

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

DE-REGISTER?

Confirm the prompt.

GAP

eneric

ccess

rofile

= European

standard for the interaction of hand-
sets and base stations

PIN ****

Summary of Contents for Gigaset 4010 Classic






































































Search results

Summary of Contents for Gigaset 4010 Classic

Reviews:

Related manuals for Gigaset 4010 Classic

Brands by name

Popular brands

Siemens Gigaset 4010 Classic, Operating Instructions Manual

Search results

Summary of Contents for Gigaset 4010 Classic

Reviews:

Related manuals for Gigaset 4010 Classic

Brands by name

Popular brands