7
Preparing the telephone
Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619
vorberei.fm
11.06.01
Operating the handset
Inserting the batteries
●
Insert the batteries
ensuring correct polarity
– see figure on left.
●
Replace cover and push gently
upward
until it clicks into place.
●
To open,
press the grooved area on the cover and slide
back
.
Placing the handset into the base station and charging the
batteries
Before activating your handset, place it in the base station with the dis-
play facing upward. After approx. one minute, the handset's internal
number is displayed (e.g. “ INT 1 ”).
Leave the handset for approx. five hours in the base station to charge
the batteries. The charging status icon flashes on the handset indicat-
ing that the batteries are being charged:
Note:
Your Gigaset is now ready for operation. Please set date and the time
(see page 9), so that the time of incoming calls can be noted correctly.
The display is protected by a plastic film.
Remove the protective plastic film!
¬
●
Only insert the recommended rechargeable
batteries
page 56). Never use ordinary (non-rechargeable) batteries or
health risks and personal injuries cannot be excluded.
●
Never use non-Siemens charging units as these can damage
the batteries.
¬
For information on how to
register
further handsets
(bought
additionally), see page 35.
µ
Batt. empty (symbol flashes)
Batt.
2
/
3
charged
Batteries
1
/
3
charged
Batt. fully charged
+
– +
–
+
–
F
5 h
