Siemens Giga762SX User Manual Download Page 160

Page: 160 / 185

162

Appendix

Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008

hablone 2

005_0

7_2

You cannot conduct VoIP tel-
ephone calls.

The phone or the Giga762SX WLAN dsl is not con-
nected properly to the DSL port. Check the cabling
and the ports.

The access data for your VoIP phones is not entered
correctly. Check the access data.

You have not assigned the VoIP phone numbers to
the telephone port. Check the configuration of the
telephone ports and the extensions.

Your VoIP configuration is not set up with the cor-
rect Codecs. Contact your VoIP provider and assign
the correct Codecs (see page 100).

Password forgotten or lost.

Reset the Giga762SX WLAN dsl (page 26).

Warning

: Please bear in mind that this will return

all

the configuration settings to the factory settings.

You cannot access a
resource (drive or printer)
on a different PC.

Make sure that TCP/IP has been installed and con-
figured on all the PCs in the local network and that
the PCs all belong to the same workgroup.

Check whether the resource has been released on
the PC in question and whether you have the nec-
essary access rights.

Printing: Check whether the printer has been set up
as a network printer.

Symptom

Possible cause and solutions

Summary of Contents for Giga762SX


























































































































































































Search results

Summary of Contents for Giga762SX

Reviews:

Related manuals for Giga762SX

Brands by name

Popular brands

Siemens Giga762SX, User Manual

Search results

Summary of Contents for Giga762SX

Reviews:

Related manuals for Giga762SX

Brands by name

Popular brands