Siemens Giga762SX User Manual Download Page 107

Page: 107 / 185

109

Configuring Advanced Settings

Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008

hablone 2

005_0

7_2

Go to the

Advanced Settings

menu and select:

USB

Select the

option for

USB

Click

to activate the USB port.

If a USB device is connected, its

Status

is displayed. If a USB mass storage device is con-

nected, the partitions are displayed.

Click

Refresh

to display the current status.

Notes:

If you connect a USB hub to the USB port of the Giga762SX WLAN dsl, you can con-
nect and use a USB memory and a USB printer at the same time.

If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500 mA.

The Giga762SX WLAN dsl supports USB V 2.0. Devices that support USB V 1.1 may
also be connected.

The following file system formats are supported: FAT, FAT32, VFAT
NTFS is not supported.

There should be not more than 1000 files stored in any directory of the USB mass
storage device.

Summary of Contents for Giga762SX


























































































































































































Search results

Summary of Contents for Giga762SX

Reviews:

Related manuals for Giga762SX

Brands by name

Popular brands

Siemens Giga762SX, User Manual

Search results

Summary of Contents for Giga762SX

Reviews:

Related manuals for Giga762SX

Brands by name

Popular brands