Mounting
Mounting the housing
4
15 | 32
Building Technologies
A6V10393194_d_en_--
Fire Safety
2018-11-05
4 Mounting
Scope of delivery
The power supply kit (70 W) is supplied mounted with housing, a left-hand
installation frame with integrated power supply (70 W) FP2015 and FP120-Z1
mainboard, a right-hand installation frame for optional components, and a pre-
wired connection for the battery, as well as mounting instructions for wall mounting
and optional components: Document ID A6V10393173.
NOTICE
Electrostatic discharge
Damage to electronics
●
Take protective measures against electrostatic discharges (ESD).
Observe the following order for mounting the FP120-Z1:
1. Mount the housing
2. Mount the optional components
3. Connect the signal lines
4. Disconnect the mains voltage, disconnect the mains cable, and connect the
mains cable
5. Install and connect the batteries
6. Mount the cover cap
7. Switch on the mains voltage
4.1 Mounting the housing
Use the mounting instructions, document ID A6V10393173, from the scope of
delivery.
