14
Switching off the oven automatically
Enter a cooking time for your dish.
Example in the picture:
%
Top/bottom heating, 200 °C,
cooking time 45 minutes.
1.
Use the function selector to select the required type of
heating.
2.
Use the temperature selector to set the temperature or the
grill setting.
3.
Press the
0
Clock button twice.
The
x
Cooking time symbol appears.
4.
Use the + or - button to set the cooking time.
+ button / default value = 30 minutes
- button / default value = 10 minutes
The oven starts after a few seconds. The
x
Cooking time
symbol appears in the display.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
0
button
twice and switch off the function selector.
Cancelling the setting early
Press the
0
Clock button twice. Press the - button until a zero
appears in the display. Switch off the function selector.
Changing the setting
Press the
0
Clock button twice and make your settings as
described in section 4.
Note:
You can change the setting while the symbol is flashing.
When the symbol lights up, the setting has been adopted.
Setting the timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer or cooking time has expired.
Setting procedure
1.
Press the
0
Clock button.
The
S
timer symbol flashes.
2.
Use the + or - button to set the timer time.
+ button / default value = 10 minutes
- button / default value = 5 minutes
The timer starts after a few seconds. The
S
symbol appears in
the display. The elapsed time is shown.
The time has elapsed
A signal sounds. Press the
0
Clock button. The timer display
goes out.
Changing the timer duration
Press the Clock button. Use the + or - button to change the
time.
Cancelling the setting
Press the
0
Clock button. Press the - button repeatedly until a
zero appears in the display.
The timer and cooking time count down at the same time
The symbols light up. You can see the timer time counting
down in the display.
To query the
x
remaining time:
Press the
0
button.
The queried value appears in the display for a few seconds.
