BA 5080 en 06/2014
9.
Faults, causes and remedy
Observe the instructions in section 3, "Safety instructions", and in section 10, "Maintenance and repair"!
9.1
General information on faults and malfunctions
Faults and malfunctions occurring during the guarantee period and requiring repair work on the gear unit
must be carried out only by Siemens customer service.
In case of faults and malfunctions occurring after the guarantee period and whose cause cannot be
precisely identified, we advise our customers to contact our customer service.
NOTICE
Material damage
Risk of damage to the gear unit through improper use.
Siemens will not be bound by the terms of the guarantee or otherwise be responsible for further operation
in cases of improper use of the gear unit, modifications carried out without the approval by Siemens or
use of spare parts not originally supplied by Siemens.
DANGER
Danger to life through switchedon installation
To carry out maintenance and/or repair work, the gear unit must always be stopped.
Secure the drive unit to prevent unintentional switchon. A notice should be attached to the ON switch
stating clearly that work is in progress on the gear unit.
