BA 5080 en 06/2014
12.
Declarations
12.1
Declaration of incorporation
Declaration of incorporation
in accordance with Directive 2006/42/EC, Annex II 1 B
The manufacturer, Siemens AG, 46395 Bocholt, Germany, declares with regard to the partly completed
machinery
Gear unit
H3LV
Sizes 6 to 18
for driving lauter-tun spent-grain cutting machines:
– The special technical documents described in Annex VII B have been prepared.
– The following basic health and safety requirements set out in Directive 2006/42/EC, Annex I,
are applied and are satisfied:
1.1, 1.1.2, 1.1.3, 1.1.5, 1.2.4.4, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.6, 1.3.7, 1.3.8.1, 1.4.1, 1.4.2.1, 1.5.1,
1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.5.13, 1.5.15, 1.6.1, 1.6.2, 1.7.1, 1.7.1.1, 1.7.2,
1.7.4, 1.7.4.1, 1.7.4.2, 1.7.4.3
– The partly completed machinery must not be put into service until it has been established that the
machinery into which the partly completed machinery is to be incorporated has been declared
to be in conformity with the provisions of Directive 2006/42/EC, as appropriate.
– The manufacturer undertakes, in response to a reasoned request by the national authorities,
to transmit in electronic form relevant information about the partly completed machinery.
– The person authorised to compile the relevant technical documentation is:
Mark Zundel (I DT MD AP EMEA VOE OE)
Voerde, 2014‐06‐30
Mark Zundel
(I DT MD AP EMEA VOE OE)
Voerde, 2014‐06‐30
Dr. Bernhard Hoffmann
(I DT MD AP)
