BA 5814 en 09/2014
12.
Declarations
12.1
Declaration of incorporation
Declaration of incorporation
in accordance with Directive 2006/42/EC, Annex II 1 B
The manufacturer, Siemens AG, 46562 Voerde, Germany, declares with regard to the partly completed
machinery
Glazing-cylinder gear unit
GHZP, GHDP
Sizes 360 to 2680
for driving glazing cylinders in paper-processing machines:
–
The special technical documents described in Annex VII B have been prepared.
–
The following basic health and safety requirements set out in Directive 2006/42/EC, Annex I,
are applied and are satisfied:
1.1, 1.1.2, 1.1.3, 1.1.5; 1.2.4.4, 1.2.6; 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.6, 1.3.7, 1.3.8, 1.3.8.1; 1.4.1, 1.4.2.1;
1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.5.13, 1.5.15; 1.6.1, 1.6.2; 1.7.1,
1.7.1.1, 1.7.1.2, 1.7.2, 1.7.4, 1.7.4.1, 1.7.4.2, 1.7.4.3
–
The partly completed machinery must not be put into service until it has been established
that the machinery into which the partly completed machinery is to be incorporated has been
declared to be in conformity with the provisions of Directive 2006/42/EC, as appropriate.
–
The manufacturer undertakes, in response to a reasoned request by the national authorities,
to transmit in electronic form relevant information about the partly completed machinery.
–
The person authorised to compile the relevant technical documentation is:
Dr. Nico van de Sandt (Head of Engineering DAE)
Voerde, 2014‐09‐30
Dr. Nico van de Sandt
(Head of Engineering DAE)
Voerde, 2014‐09‐30
Dr. Bernhard Hoffmann
(Vice‐President Business Subsegment DA)
