Siemens FC72x Quick Reference Manual Download Page 5

Page: 5 / 62

About this document

Applicable documents

5 | 62

Building Technologies

A6V10211094_f_en_--

Fire Safety

2015-12-15

1 About this document

Goal and purpose

These brief instructions aim to provide experienced and qualified installation and

operating staff with a guide on how to mount, install, commission and repair the

system.

Scope

These brief instructions are supplements to the documents provided for the

Cerberus PRO FS720 fire detection system and apply for the following products:
● Fire control panel FC722, FC724
● FT724 fire terminal
These brief instructions only apply to use with C-NET detector line cable and when

commissioning with auto-configuration. They do not include other applications

and/or components of extended networking.
The information contained in this document is valid for introduction package IP6.

Target groups

The information in this document is intended for the following target groups:

Target group

Activity

Qualification

Installation personnel

● Assembles and installs the

product components at the place

of installation.

● Carries out a function check

following installation.

● Has received specialist training in the

area of building installation technology

or electrical installations.

Operating personnel

● Carries out procedures to

correctly operate the product.

● No particular basic training is needed.
● Has been instructed by the

commissioning personnel.

Source language and reference document

● The source/original language of this document is German (de).
● The reference version of this document is the international version in English.

The international version is not localized.

Document identification

The document ID is structured as follows:

ID code

Examples

ID_ModificationIndex_Language_COUNTRY
-- = multilingual or international

A6V10215123_a_de_DE
A6V10215123_a_en_--
A6V10315123_a_--_--

Date format

The date format in the document corresponds to the recommendation of

international standard ISO 8601 (format YYYY-MM-DD).

Summary of Contents for FC72x































































Search results

Summary of Contents for FC72x

Reviews:

Related manuals for FC72x

Brands by name

Popular brands

Siemens FC72x, Quick Reference Manual

Search results

Summary of Contents for FC72x

Reviews:

Related manuals for FC72x

Brands by name

Popular brands