Siemens EX8 Series, User Manual

Page: 29 / 40

Cleaning and servicing
en
29
1. ATTENTION!
Falling grease filters may damage the hob below.
▶
Grip below the grease filter with one hand.
Remove the grease filter.
‒
Grease may accumulate in the bottom of the
container. Hold the grease filter level to prevent
grease from dripping out.
‒
2. Clean the grease filters.
‒
→ "Cleaning the grease filters manually",
Page 29
‒
→ "Cleaning the grease filter in the dishwasher",
Page 29
3.
If required, remove the odour filters or acoustics fil-
ters and clean the appliance from the inside.
→
"Changing the odour filter or acoustics filter",
Page 27
4. If any objects get into the appliance, remove these
objects and ensure that the supply to the overflow
container is not blocked.
5.
Wipe out the inside of the appliance with soapy wa-
ter and a dish cloth.
6.
After cleaning, reinsert the dried metal grease filter.
Cleaning the grease filters manually
1. Dismantle the grease filter.
2. Soak the grease filter in hot soapy water.
3.
Use a brush to clean the grease filter.
Do not use aggressive, acidic or alkaline cleaning
products.
Use special grease solvent for stubborn dirt. You
can purchase the grease solvent from the after-
sales service, through our online shop or in a spe-
cialist shop.
4. Rinse the grease filters thoroughly.
5.
Allow the grease filters to drain.
Cleaning the grease filter in the dishwasher
1.
Dismantle the grease filter.
2. Place the grease filters loosely in the dishwasher
and do not jam it in.
For optimum cleaning results, lay the grease filter
on the filter side in the dishwasher.
Do not clean heavily soiled grease filters with
utensils.
Do not use aggressive, acidic or alkaline cleaning
products.
3. Start the dishwasher.
Select a temperature of no more than 70 °C.
4. Allow the grease filters to drain.
26.7 Cleaning the overflow container
The overflow container collects liquids or objects that
come into the appliance from above.
Requirement: The appliance has cooled and the resid-
ual heat indicator has gone out.
1. Hold the overflow container with one hand and un-
screw it with the other hand.
‒
Hold the overflow container level to prevent liquid
from leaking out.
2. Empty the overflow container and rinse it out.
3. If required, unscrew the screw and clean the over-
flow container without the screw in the dishwasher.
4. Clean the overflow container before screwing it
back into place.
5. Ensure that the supply to the overflow container is
not blocked.
Remove any objects that have entered the appli-
ance once it has cooled down. To do this, remove
the grease filter. →
Page 28