Siemens ET9 LVV1 Series, User Manual

Page: 14 / 24

en
Home Connect
14
Dis-
play Selection
⁠ ⁠ Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
hotplate.
1
Resetting to the factory settings
– Switched off.
1
– Switched on.
1
Factory setting
→
"Overview of the Home Connect settings", Page 15
→
"Overview of the hood control settings", Page 18
13.2 Changing basic settings
Requirement:
The hob is switched off.
1.
Switch on the hob.
2.
Within the next 10 seconds press and hold for
approx. 4 seconds.
a
The customer service index appears.
3.
To scroll through the display, touch the control
panel.
Example of display Meaning
Customer service index
(KI)
Date of manufacture
⁠ ⁠. Year of manufacture
⁠. Month of manufacture
4.
Touch again.
a appears.
a
lights up on the hotplate display.
5.
Touch repeatedly until the required display ap-
pears.
6.
Set the required value on the control panel.
7.
Press and hold for 4 seconds.
a The setting is activated.
Tip:
To exit the basic settings, switch off the hob using
. Switch the hob on again and reset.
14
Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
"Safety", Page 3
¡
Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
14.1 Setting up Home Connect
Requirements
¡
The appliance is connected to the power supply and
is switched on.
¡
You have a smartphone or tablet with a current ver-
sion of the iOS or Android operating system.
¡
The smartphone and the appliance are within range
of your home network's Wi-Fi signal.