Siemens ET 200SP HA, Equipment Manual

Page: 46 / 48

Diagnostics mes‐
sage Channel
error
type
(CET) Exten‐
ded chan‐
nel error
type
(CET) Assignment Meaning Remedy
Redundancy error:
Failure in the partner
module <internal er‐
ror code> 0x0630 0x06D0 Redundant
modules Errors in the redundancy of
the interface module are sig‐
naled.
The accompanying <internal
error code> value provides in‐
formation for service experts. Replace the partner interface
module.
Redundancy error:
Faulty power supply 0x0630 0x06D1 Redundant
modules Problems with the power sup‐
ply. Check the power supply for
possible errors, e.g. overload,
short-circuit.
Replace the interface module,
if necessary/
Redundancy error:
Incorrect bus adapter
in partner module 0x0630 0x06D2 Redundant
modules The bus adapter of the redun‐
dancy partner module is not
present or is not supported. Replace the bus adapter in the
partner module.
Redundancy error:
Redundancy partners
have different hard‐
ware / firmware. 0x0630 0x06D3 Redundant
modules The redundant modules dif‐
fer in terms of the hardware
or firmware versions. Make sure that the hardware
or firmware versions of the re‐
dundant modules are identi‐
cal:
• Hardware version:
Replace at least one mod‐
ule.
• Firmware version:
Perform a firmware update.
PROFINET IO
Another source of diagnostic events is the PROFINET basic technology in use. It generates
diagnostics messages containing coding that is already defined in the PROFINET IO Standard -
Application Layer Service Definition V2.2.
The actual diagnostics scope used depends on the configuration and parameter assignment.
You can download the standard if needed on the Internet ( http://www.profibus.com ) from the
home page of the PROFIBUS user organization.
A.2 Maintenance events
Maintenance events
A maintenance event is generated each time a maintenance requirement is identified. The MT
LED lights up on the module.
Diagnostic messages
A.2 Maintenance events
IM 155-6 PN HA
46
Equipment Manual, 09/2021, A5E39262148-AE