background image

 

GB 

Operating, installation and caring instructions 

page 02 

 

English 

Dear Customer, 
 
We thank you and congratulate you on your choice. This practical appliance, 
which is modern and functional, has been manufactured from top-quality 
materials which have been subjected to a strict quality control during the entire 
manufacturing process and have been carefully tested so that they will meet all 
your cooking needs. 
We strongly advise you to read through these simple instructions, so as to ensure 
that you get perfect results from the moment you first use this appliance. This 
booklet contains important information, not only on how to use the appliance, but 
also on maintenance and safety. 
When our products are being transported, they must be provided with suitable 
protective packaging. However, we have reduced our packaging to the bare 
essentials, and the materials are all completely recyclable. You too can contribute 
to the conservation of the environment by depositing the packaging in the nearest 
recycling container. Before you get rid of an old appliance, make sure you render 
it useless, and then take it to a centre for the recovering recyclable materials. Ask 
your local authorities for details on the nearest centre to your home. 
 
 

Safety Warnings 

 

‰

 

Read this user’s manual carefully, to ensure that you use this appliance 
as effectively and safely as possible. 

‰

 

The following instructions are only valid in countries whose symbol 
appears on the rating plate of the appliance. To adapt the appliance to 
conditions of use in your country, always follow the technical instructions. 

‰

 

Make sure you keep these instructions for use and assembly, so that you 
can hand them on with the appliance if it ever changes owner. 

‰

 

The diagrams contained in this instruction book are for orientation 
purposes only.

 

‰

 

This appliance is intended solely for household use only. 

‰

 

Only use this appliance for cooking, and never as a form of heating. 

‰

 

In accordance with current regulations, installation of the appliance, 
changing of gas types or other adjustments to the interior of the appliance 
may only be carried out by an officially authorised technician. 

‰

 

Before having your new cooking hob installed, check that the 
measurements are correct. 

Summary of Contents for ER12553EU





























Reviews: