Siemens DP/AS-Interface Link 20E, Manual

Page: 71 / 160

Using the Command Interface
71
DP/AS-Interface Link 20E
Release 11/2002
C79000-G8976-C138–04
Table 3-3 Return Value in the Response Buffer, continued
STATUS Meaning
83A3
H
An AS-i slave with the new address already exists on the AS-Interface.
83A4
H
The AS-i slave address cannot be deleted.
83A5
H
The AS-i slave address cannot be set.
83A6
H
The AS-i slave address cannot be stored permanently.
83A7
H
Error reading the extended ID1 code.
83A8
H
The target address is not plausible (for example a B slave address was used for a
standard slave).
83B1
H
A length error has occurred transferring a string according to profile 7.4.
83B2
H
A protocol error has occurred transferring a string according to profile 7.4.
83F8
H
The job number or the job parameter is unknown.
83F9
H
The AS-i master has detected an EEPROM error.
Note
Errors that occur during processing of the acyclic services and that are indicated
by call parameters such as “Return Value” can be found in the documentation of
the relevant programming interface.