Additional Options
SCSI Setup
24 - English
A26361-D981-Z120-9-7419
When
Sync Negotiation
is disabled, the Ultra-Wide SCSI controller will automatically
go into synchronous mode if it receives a request from one of your SCSI devices.
It can, however, also exchange data with slow SCSI devices.
Yes
The function is enabled (default entry).
No
The function is disabled.
i
Synchronous data transfer is required for fast and ultra SCSI operation.
Initiate wide negotiation
This option determines whether the SCSI controller attempts 16-bit data transfer
(Wide SCSI) instead of 8-bit data transfer.
Only disable
Initiate Wide Negotiation
if you do not use any wide SCSI devices or if
8 bit SCSI devices have problems during operation. You may have to make
settings on your SCSI devices. (refer to the documentation supplied with your
SCSI device).
Fast SCSI devices, including the ultra-wide SCSI controller, are capable of
transferring data to and from the SCSI bus at speeds ranging up to 40 Mbyte/s.
Yes
The function is enabled (default entry).
No
The function is disabled.
Maximum Sync Transfer Rate
Fast SCSI devices (ultra-wide), including the ultra-wide SCSI controller, are
capable of transferring data to and from the SCSI bus at speeds ranging up to
40 Mbyte/s at synchronous data transfer. If you have entered
Enabled
in the
Support for Ultra SCSI Speed
menu item, the transfer rate of 40 Mbyte/s is entered
automatically.
Summary of Contents for D981
Page 16: ......
