background image

370LXB Motherboard

 

User’s Manual

 

Product Name : 370LXB

 

Manual Revision: English, 1.0

 

Trademarks

Intel and Socket 370 are trademarks of Intel Corporation
Award is a trademark of Award Software International Inc.
MS-DOS, Windows 95, Windows 98 and Windows NT are registered trademarks of Microsoft Corporation
OS/2 is a trademark of International Business Machines Corp
Novell is a trademark of Novell Corporation
Sound Blaster SB16 is a trademark of Creative Technology
ESS and Solo-1 are trademarks of ESS Technology, Inc.
All other brand and product names are trademarks or registered trademarks of their respective companies.

 

Table of Contents

Chapter 1. Introduction

1.1 Product Overview
1.2 Specifications
1.3 Content
1.4 MotherBoard Layout

Chapter 2. Hardware Setup

2.1 Installation Procedure

2.1.1 Jumper Setting
2.1.2 Enable/Disable Sound
2.1.3 Clearing the CMOS
2.1.4 CPU Voltage Setting

2.2 Installation of CPU
2.3 Installation of Memory

2.3.1 Installation of 168-pin DIMM
2.3.2 Removal of 168-pin DIMM
2.3.3 Memory Configuration

2.4 I/O Connections/Panel Connections

2.4.1 ATX Power Connector
2.4.2 AT Power Connector
2.4.3 CPU Fan Connector
2.4.4 Infrared Connector
2.4.5 Floppy Disk Drive Connector
2.4.6 Primary/Secondary IDE Connector
2.4.7 PS/2 Mouse Port
2.4.8 Serial Port
2.4.9 Printer Port
2.4.10 USB Connectors
2.4.11 Wake-up on LAN Connector
2.4.12 Creative’s SB_LINK Sound Connector
2.4.13 Game/MIDI Connector
2.4.14 Line out/Line in/Microphone Connector
2.4.15 Mitsumi CD-ROM Audio
2.4.16 ATAPI/IDE Sony CD-ROM Audio
2.4.17 Panel Connection

Chapter 3. BIOS Setup

Summary of Contents for 370LXB





















Reviews: