Safety
6
Siemens AG
04.2011
1.2.2
Installation of the device
Damage due to unsuitable mounting location
z
The environmental conditions recommended by the manufacturer must be
observed.
z
Do not operate the device in excessively dusty places.
z
Do not expose the device to mechanical vibrations or shocks.
Danger of electric shock
z
Connect the device only to power sources with the specified voltage. Voltage
supply requirements can be found on the type label and on the mains adapter.
z
Connect the device only to a power source that complies with the Limited Power
Source requirements to EN 60950-1.
z
Connect the device only to a power source that complies with SELV
requirements.
Risk of cable damage due to stress
z
Do not apply tensile stress to the cable.
z
Make sure that cables are not under stress, kinked or damaged.
1.2.3
Service and maintenance
Damage to the device
z
Do not attempt to service this device yourself. Refer this work to qualified service
personnel.
z
Always disconnect the power cable and other cables from the main power
supply before performing maintenance.
z
Disconnect the device from the mains supply before cleaning it.
z
Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.
