Siemens CP 243-1 IT Technical Manual Download Page 60 | Manualshive

Page: 60 / 134

background image

Configuration

03/03

CP 243-1 IT

J31069-D0429-U001-A0-7618

60

Note

Whole numbers with sign (format element) and whole numbers without sign (format
element U) can be interpreted as fixed point decimal numbers.

Example:
VD 100 contains the fixed point number for the to-be-interpreted value 12345

dec

.

If the placeholder %VD100:2.3U% is used for this value in an e-mail, this value is
transmitted in the e-mail as 12.345.

Calculation: Result = value / (10^number of desired positions after the decimal

point)

12.345 =12345/10^3

Note

Received e-mails may also contain #### in the placeholder instead of the expected
value. This always happens when a placeholder could not be filled with a value that
conformed to the formatting instructions.

4.3

Configuration of a CP 243-1 IT with STEP 7
Micro/WIN 32

After you have installed and started STEP 7 Micro/WIN 32 on your PC, start the
wizard for the CP 243-1 IT. The wizard is located in "Tools" under the item "Inter-
net-Assistent..." or also in the left-hand boy area of STEP 7 Micro/WIN 32 in the
box with the navigation bar under the item "Tools" (if this view is activated on your
STEP 7 Micro/WIN 32).

You can use the Internet wizard to configure your CP 243-1 IT. You can enter all
relevant configuration data in several screens. User prompting is designed so that
you cannot switch to the next screen until all your entries are correct and complete.
If not, an error message appears.

The Internet wizard consists of four internal wizards which are used to configure
the various IT services. First, open the configuration wizard. In this wizard, basic
configuration data are specified (such as TCP/IP address parameters) and S7
communication is configured. All configuration information specified here are
stored on the S7-200 CPU when loaded to your S7-200 system. After you have
completed this wizard, you can exit the configuration or configure the various IT
services of the CP 243-1 IT with other wizards.

For this the Internet wizard offers an FTP wizard and an e-mail Wizard plus a wiz-
ard for configuring user administration. The information specified in these wizards
is stored in the file system of the CP 243-1 IT when loaded to the S7-200 system.
The configuration of each CP 243-1 IT can be concluded after one of these three
wizards has been passed through. If one of these wizards is not passed through
before concluding the configuration, this IT service is not configured.

Below is a short description of the individual wizards and the individual steps of
configuration which these wizards lead you through.

«
...
58
59
60
61
62
...
»

Summary of Contents for CP 243-1 IT







































































































































Reviews:

No comments

Related manuals for CP 243-1 IT

Brand: XDS Pages: 99

NetStructure ZT 5515

Brand: Intel Pages: 90

FRDM-STBC-SA9500

Brand: Freescale Semiconductor Pages: 2

DesignCore RVP-TDA3 Series

Brand: D3 Pages: 34

Brand: Uniflair Pages: 24

Brand: National Instruments Pages: 56

Brand: Comway Pages: 20

Brand: Lattice Semiconductor Pages: 43

ACCULINK 3161 CSU

Brand: Paradyne Pages: 19

Brand: Vecow Pages: 61

Brand: Variscite Pages: 17

X-FireWire Card

Brand: Apogee Pages: 32

Brand: Datalogic Pages: 2

Brand: IEI Technology Pages: 146

Brand: PairGain Pages: 68

Brand: Actisense Pages: 14

Brand: Dell Pages: 37

Brand: GE Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands