Siemens CP 1626 Operating Instructions Manual Download

Page: 71 / 72

CP 1626
Operating Instructions, 11/2018, C79000-G8976-C434-03

Approvals

Note
The specified approvals apply only when the corresponding mark is printed on the

communications processor.

Electromagnetic compatibility - EMC directive

The communications processor meets the requirements of the EC Directive:2004/108/EEC

(EMC directive).
The communications processor is designed for use in the following areas:

Area of application

Requirements

Emission

Immunity

Residential areas, business and commercial opera-

tions, and small businesses

EN 61000-6-3

EN 61000-6-1

Industrial environment

EN 61000-6-4

EN 61000-6-2

EC declaration of conformity

You will find the EC declaration of conformity for the communications processor on the

Product Support pages under the following entry ID:
58826997 (

https://support.industry.siemens.com/cs/ww/en/view/58826997

)

C-Tick approval

The communications processor meets the requirements of the Australian AS/NZS 3548

standard according to EN 61000-6-3.

CSA approval

The communications processor has an approval in accordance with the Canadian CAN/CSA

C22.2 No. 60950-1 standard.

ICES conformity

The communications processor meets the requirements of the Canadian standard ICES-003.

It is rated as a digital device of Class B ("Class B digital apparatus").

Summary of Contents for CP 1626









































































Search results

Summary of Contents for CP 1626

Reviews:

Related manuals for CP 1626

Brands by name

Popular brands

Siemens CP 1626, Operating Instructions Manual

Search results

Summary of Contents for CP 1626

Reviews:

Related manuals for CP 1626

Brands by name

Popular brands