Siemens CP 1626 Operating Instructions Manual Download Page 53

Page: 53 / 72

Operating hardware

4.3 Web server

CP 1626
Operating Instructions, 11/2018, C79000-G8976-C434-03

"Current Role" display

Value

Meaning

OFF

Media redundancy is deactivated in the ring topology.

MANAGER

The device is a redundancy manager.

CLIENT

The device is a redundancy client.

"Ring State" display

Value

Meaning

---

The device is not a redundancy manager. This means that the ring status

cannot be displayed.

OPEN

The ring is open, there is a problem.

CLOSED

The ring is closed, there is no problem.

"MRP Domain" display

Name of the redundancy domain; this is set in "STEP 7 Professional (TIA Portal)".

"Ring Port 1 / Ring Port 2" display

The meaning of ring port 2 is analogous to that of ring port 1.

Value

Meaning

Port 1 - BLOCKED

The port does not allow any user data to pass through, only MRP frames.

Port 1 - DISABLED

The port was disabled.

Port 1 - UP

The port allows all frames through.

Port 1 - DOWN

The port does not have a link.

Note
Configuring in the STEP 7 project

As an alternative, you can also make this setting in "STEP 7 Professional (TIA Portal)".

Summary of Contents for CP 1626









































































Search results

Summary of Contents for CP 1626

Reviews:

Related manuals for CP 1626

Brands by name

Popular brands

Siemens CP 1626, Operating Instructions Manual

Search results

Summary of Contents for CP 1626

Reviews:

Related manuals for CP 1626

Brands by name

Popular brands