Siemens CP 1626 Operating Instructions Manual Download

Page: 41 / 72

Operating hardware

4.3 Web server

CP 1626
Operating Instructions, 11/2018, C79000-G8976-C434-03

"Module information"

Depending on the selected level, the table shows information on the PC station, the DP

master system, the PNIO master system, the nodes, the individual communications

processors or even the modules or submodules of the station.

"Display of the module levels"

Via t

he links, you go to the "Module information" of the higher module levels.

"Details"

With the "Details" link, you obtain further information on the selected communications

processor in the "Status" and "Identification" tabs.

"IP address"

If a link is available here, this will bring you to the Web server of the selected and configured

I/O device.

"Topology"

The two web pages, "Topology" and "Module information", are linked. A click on "Topology"

of the selected communications processor automatically takes you to this communications

processor in the graphic view of the the set topology on the "Topology" Web page. The

communications processor appears in the visible area of the "Topology" web page and the

device head of the selected communications processor flashes for a few seconds.

"Status" tab

This tab contains information on the status of the selected communications processor if there

is a fault or a message pending.

"Identification" Tab

This tab contains data to identify the selected communications processor.

Note
In this tab, only data that was configured offline is displayed, but no online data of

communications processors.

Summary of Contents for CP 1626









































































Search results

Summary of Contents for CP 1626

Reviews:

Related manuals for CP 1626

Brands by name

Popular brands

Siemens CP 1626, Operating Instructions Manual

Search results

Summary of Contents for CP 1626

Reviews:

Related manuals for CP 1626

Brands by name

Popular brands