CP 1625 / CP 1625Dev
Operating Instructions, 04/2018, A5E43075902-AA
9
Product overview
2
Principle
The following table provides an overview of the components of the CP 1625 and
CP 1625Dev:
Components
CP 1625
CP 1625Dev
Strain relief
x
x
Adhesive feet - 4 units
-
x
Terminal block for 24 V DC power supply
-
x
Advanced interface configuration
•
X500: UART0
•
X501: UART1
•
X602: Interface for PROFINET certification
•
X2200: Jumper for selecting boot source
•
X1600: Jumper for selecting restart behavior
•
X2000: Jumper for selecting power supply source
-
x
Note
If the consignment is incomplete, contact your supplier or your local Siemens office.
2.1
Hardware and software requirements
Hardware requirement
The CP 1625 requires a short PCIe slot with master capabilities for operation.
Software requirement
The CP 1625 requires additional software for operation, e.g. CPU 1507S or a dedicated
SDK.
Siemens Automation Parts
