4
Smart Infrastructure
A6V13605540_en--_b
Smart Infrastructure
2022-10-14
Optional hardware (not provided)
The optional hardware depends on the connection type.
●
Bus connection cable: 2 wires, 24 AWG, minimum section: 0.22 mm
2
+ braid
●
Power supply cable: 2 wires (red, black), 22 AWG or 0.35 mm
2
●
Ethernet cables
●
Ethernet switch
●
Echelon U60 FT DIN USB Gateway (for LON FT10)
●
Double-sided high performance adhesive tape
●
LoRaWAN network tester (e.g. Adeunis ARF8123AA)
●
High-gain external GSM antenna (e.g. Siretta Oscar 40)
●
High-gain external LoRaWAN antenna (e.g. EAD WMO86916)
●
Technical documentation of equipment
●
Technical documentation of IoT sensors
●
Diagram of the communication network(s) of the BMS
The optional hardware cannot be ordered through Siemens.
Technical and mechanical design
3
GSM antenna
4
LoRaWAN antenna
5
Plug-in terminal block with screw terminals
RS485 1 / RS485 2 (Modbus RTU)
6
USB micro port (used for maintenance only)
7
Plug-in terminal block with screw terminals
X-bus (LPB-bus)
8
Plug-in terminal block with screw terminals
M-bus
9
Ethernet port 1 and 2
10
USB port 1 and 2
11
Plug-in terminal block with screw terminals
KNX
12
Plug-in terminal block with screw terminals
Power supply
1
Plastic housing
13
Notch for mounting on DIN rails
2
Heartbeat and status LEDs
