CD3500 & CD4000 Installation and User manual
9
ENG
Fitting CD3500 to door
Remove the cylinder ring
and the door handle from
the door by loosening the
four screws.
The lever handle spindle
should project no more
than 20 mm on the outside
of the door. If the spindle
is too long, push it through
into the handle on the
inside. If this cannot be
done, cut the spindle to
the right length.
Screw
the
supplied
extension sleeves to the nipples for the handle.
Use the appropriate size sleeve to suite the bolts
supplied with the handles.
Place
Codoor
on the outside of the door with the
handle attached, and
pass the lever handle
spindle through the
square hole.
Note! The
red mark on the follower
should always point
downwards.
Tighten, not too hard,
the four
previously
loosened
screws (the
screws for the handle first).
1.
2.
3.
4.
5.
RED
RED
55
44
33
11
22
Summary of Contents for Codoor CD3500
Page 2: ...Book contents English 3 Svenska 23 Deutsch 43 Français 63 ...
Page 83: ......