12
CD3500 & CD4000 Installation and User manual
ENG
Deactivation function
The ninth code may be used as a “deactivation” code, by which
Codoor may be set manually in the unlocked
position. Follow these steps:
Press
then
enter code
9 (4 digits). Finish
by pressing
.
The red LED will flash slowly, accompanied by simultaneous
sounding of the buzzer.
Press
1
. The green LED will come on. The buzzer
sounds a rising tone to confirm the code has been
entered.
After 4 seconds the lock will open. It will then open automatically
each time the door handle is used. Codoor will remain unlocked
until reset to the locked position.
NoTE!
If the Codoor fails to open the lock (i.e. the handle is held own),
it will attempt to open the lock 10 times. It will try a further 10
times if a button is pressed at least 10 seconds after Codoor has
tried unsuccessfully to unlock the door.
Return to locked position
Proceed like this:
Press
then
enter code 9
(4 digits). Finish
by pressing
.
Enter
0
. The green LED will come on. The buzzer
sounds a rising tone to confirm the code has been
entered.
Press the door handle down once to re-lock the door.
Of course, code 9 works as a normal code if
is not entered before and
after the code.
1.
2.
3.
4.
1.
2.
3.
1
1
0
0
Summary of Contents for Codoor CD3500
Page 2: ...Book contents English 3 Svenska 23 Deutsch 43 Français 63 ...
Page 83: ......