Safety
General safety percautions
3
7
Siemens AG
A6V10334028
20.12.2011
3
Safety
3.1
General safety percautions
z
Read the general safety precautions before installing/configuring/operating the
device.
z
Follow all warnings and instructions marked on the device.
z
Keep this document for reference purposes.
z
This document must always accompany the product.
Liability claim
z
Use only spare parts and accessories that have been approved by the
manufacturer.
3.2
Transport
z
Keep the packaging material for future transportation.
z
Do not expose the device to mechanical vibrations or shocks.
3.3
Installation
z
It is recommended that all preparatory work (e.g. fitting of accessories) be
carried out in a workshop prior to final installation.
z
The environmental conditions recommended by the manufacturer must be
observed. See section 'technical data'.
z
Do not operate the device close to sources of powerful electromagnetic
radiation.
z
The device should only be used for indoor applications.
z
The mounting surface must be solid and non-combustible.
Danger of electrical shock/fire hazard/damage to the device due to
incorrect connection
z
Connect the device only to a power source that complies with SELV
requirements and with the Limited Power Source requirements to EN 60950-1.
3.4
Maintenance
z
Do not attempt to service or modify this device yourself. Refer this work to
qualified service personnel.
z
Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.
3.5
Sensor characteristics
The following conditions may be observed when using a CMOS camera. These are
inherent in the design and do not stem from any fault in the camera itself.