Configuration
9
Recording
46
Siemens AG
A6V10334028
20.12.2011
Z
Prerequisite: The alarm inputs have been configured.
Then proceed as follows:
1. Record Source
Select either JPEG or MPEG4 format
2. Pre-Recording Frame
Select the number of images to be recorded before an alarm occurs. Images of
the moment when the alarm occurs are not included.
D
With JPEG format, 0, 1, 3, 5, or 10 frames can be selected.
Not required with MPEG4 format.
3. Pre-Recording Cycle
Set a time interval for pre-alarm recording. With JPEG format, 1, 2, 5, 10, 30s
can be selected.
D
Not required with MPEG4 format.
4. Recording Frame
Select the number of images to be recorded immediately after an alarm has
occurred. Images of the moment when an alarm occurs are not included.
D
With JPEG format, 1, 2, 5, 10, 30, or 60 frames can be selected.
Not required with MPEG4 format.
5. Recording Cycle
Set a time interval for alarm recording. With JPEG format, 1, 2, 5, 10,
30,60,90,120s can be selected.
D
Not required with MPEG4 format.
6. Recording Time
When MPEG4 is selected, the recording time can be set to 2, 5, or 10s.
z
Recording by Motion
Z
Prerequisite: Motion detection has been configured.
z
All other settings are the same as for recording by alarm (see above).
FTP Server Settings - Server 1 and 2
Enter the FTP server name, Login ID, Password, FTP port number, FTP mode, and
FTP connecting method.
z
FTP Server Name: Enter a server name or address.
z
Login ID: Only for users who are authorized to access the server.
z
Password: Enter the registered password associated with the login ID.
z
Password (Confirm): Re-enter the password
z
FTP Port Number: Set “21” as default
z
FTP Mode: PORT - This mode is for most FTP applications; PASV - This mode
is used when the camera is operated in a network environment that is behind a
firewall.
z
FTP Connecting Method: Reconnect - The network camera logs in/out for each
file transfer; Continuous Connection - The network camera is always
connected.
Connecting method
You can choose to save your image files to either FTP server 1 or FTP server 2, or
automatically switch between servers.