manualshive.com logo in svg

Siemens C62, Service Manual, Page: 12 / 48

Share
Download
Siemens C62 Service Manual Download Page 12

S I E M E N S

 

P T E   L T D

 

C62 Level 2 Service Manual 

 
 

Copyright © Siemens Pte Ltd. 

 

    

   C62 Level 2 manual V1.1 

All Rights Reserved 

 

ICM MP CCQ SLI RHQ 

11 of 47 

 

    Internal Use Only 

5 

Disassembly of C62 

Note:

  ESD concept; the internal circuits will be more susceptible to ESD because of the use of exchangeable 

housing. The construction of the internal block must be/is designed, in the best possible way, to protect the circuit against 

sparks. 

The keypad must be completely closed to prevent any occurrence of an ESD disruptive discharge. 

The SIM contacts may be open, thus reachable for ESD contact discharge. This could lead to damage or destruction of 

the IC pins. 

It is a requirement for the service personnel to observe ESD protection rules while performing servicing the C62.  

Step 1 

 

Release the battery cover by placing your 
thumb in the top centre and press 
downwards.

 

Step 2 

 

Release the battery by pressing upwards and 
then lift it up out of the cavity.

 

Step 3 

 

Release the antenna assembly from the B-
cover by first placing the two pins of the MCR-
008 tool to the corresponding holes in the B-
cover in an angle as shown.

 

Step 4 

 

Press the tool down to release the antenna 
assembly.

 

Summary of Contents for C62

















































Reviews:

No comments