SIEMENS
Pte Ltd
C55/2128 Level 2 Service Manual
Internal Service Use Only
12.4 Software Installation
Before executing the test software, it is important to ensure that the software
configuration matches that of the hardware set up. Each GSM Tester will have
specific test software. The test software is named CMD
_
GO, CTS
_
GO and for
Wavetek test set, CAT4200 respectively.
First, copy the installation software for the specific GSM tester to a temporary
directory on the harddisk of the Window PC and then Run the Setup from the first
sub directory – Disk1 for CMD_GO test software.
After the installation for the test software, RUN the Test software and check the
configuration setting for the Serial port.
Copyright © Siemens Pte. Ltd. Siemenes Techincal Support Center
All rights reserved
ICM MP CCQ ASP/ASC
21 of 28
