SIEMENS
Pte Ltd
C55/2128 Level 2 Service Manual
Internal Service Use Only
12 SIEMENS SERVICE EQUIPMENT USER
MANUAL
12.1 Introduction
Every LSO repairing Siemens handset must ensure that the quality standards are
observed. Siemens has developed an automatic testing system that will perform
all necessary measurements. This testing system is known as:
12.2 Siemens Mobile Service Equipment
Using this system vastly simplifies the repair of the phones and will make sure
that:
1. All possible faults are detected
2. Sets, which pass the test, will be good enough to return to customer.
Starting from the P35 Series, Siemens will introduce a simpler and faster testing
platform for testing a repaired Siemens mobile phone. The testing platforms are
either base on R&S CMD 53/55 or CTS55 GSM test set.
There is also test software under development for testing with the Wavetek
4201S and the 4107 GSM test set.
A Level 2.5 service software is also under development for more elaborate
testing for the repair for the P35 series mobile phone.
THE LSO WILL HAVE TO PURCHASE THE SYSTEM, CHOOSING
BETWEEN THE COMPLETE PACKAGE OR SUB-SET OF IT
.
A F U L L Y A U T O M A T I C T E S T P R O C E D U R E I S O N L Y
P O S S I B L E I F T H E C O M P L E T E S Y S T E M I S
I N S T A L L E D .
Make sure that your CTS firmware is Version 3.01 or higher. For
CMD 55 it must be Version 4.03 and higher. Please check with the
Service Info SB_0500 for the CTS/CMD Hardware Options.
Copyright © Siemens Pte. Ltd. Siemenes Techincal Support Center
All rights reserved
ICM MP CCQ ASP/ASC
18 of 28
