background image

Installation instructions

 en

15

11.5 Test dishes

These overviews have been produced for test institutes to facilitate appliance testing in accordance with EN
60350-1:2013 or IEC 60350-1:2011 and EN 60705:2012, IEC 60705:2010.

Cooking with the microwave

Recommended settings for cooking with the microwave.

Food

Microwave power
setting in W

Cooking time in mins Note:

Custard, 750 g

1.

 360

2.

 90

1.

 12–17

2.

 20–25

Place the Pyrex dish 20 x 25 cm
on the turntable.

Biscuit

600

8–10

Place a 22 cm diameter Pyrex
dish on the turntable.

Meat loaf

600

20–25

Place a Pyrex dish on the
turntable.

Defrosting with the microwave

Recommended settings for using the microwave to defrost food.

Food

Microwave power
setting in W

Cooking time in mins Note:

Meat

1.

 180

2.

 90

1.

 5–7

2.

 10–15

Place the Pyrex dish (22 cm dia-
meter) on the turntable.

12  Installation instructions

Observe this information when installing the appliance.

 12.1 Safe installation

Follow these safety instructions when in-
stalling the appliance.

¡

The appliance can only be used safely if it
is correctly installed according to the safety
instructions. The installer is responsible for
ensuring that the appliance works perfectly
at its installation location.

¡

Check the appliance for damage after un-
packing it. Do not connect the appliance if
it has been damaged in transit.

¡

Before starting up the appliance, remove
any packaging material and adhesive film
from the cooking compartment and the
door.

¡

Never remove the transparent film on the
inside of the door.

¡

Proceed in accordance with the installation
sheets for installing accessories.

¡

Fitted units must be temperature-resistant
up to 90 °C, and adjacent unit fronts up to
65 °C.

¡

Do not install the appliance behind a decor-
ative door or the door of a kitchen unit.
There is a risk of overheating.

¡

Cut-out work on the units should be carried
out before installing the appliance. Remove
any shavings. Otherwise, the correct opera-
tion of electrical components may be ad-
versely affected.

¡

Only a licensed professional may connect
appliances without plugs. Damage caused
by incorrect connection is not covered un-
der the warranty.

WARNING ‒ Risk of injury!

Sharp-edged parts may be accessible during
installation.

Wear protective gloves.

WARNING ‒ Risk of fire!

It is dangerous to use an extended power
cord and non-approved adapters.

Do not use extension cables or multiple
socket strips.

Summary of Contents for BF520LMR0





















Reviews: