Card reader configuration
Note
:
When this command has been sent the reader must not be disconnected from the power supply.
This is acknowledged with the message "
ERASE WAIT
"
You are now prompted to send the firmware mhx file: "
START DOWNLOAD
".
You have about 2 minutes to do this.
During this period, the characters "C" and "§" will appear at intervals of
5 seconds. If no mhx file is sent within these 2 minutes, the message
"ERROR 1" will appear and the command "
FLASHALL
" will have to be
entered once more. Do not disconnect the reader!
8.
Select „Send File“ from the „Transfer“ menu.
The following dialog box opens:
Enter the desired file into the filename field and
Xmodem
into the Protocol
field.
9.
Click on „Send“ to send the file.
31
Siemens Building Technologies
Fire & Security Products
12.2004
Summary of Contents for AR6181-MX
Page 51: ......
