2000585-001
Data Communications Setup
••••
59
Assigning an IP Address
Each individual hub board (“hub-half”) in the system must have a unique
IP address. This 32-bit number defines each DNH’s network ID and host
ID. The IP address must be assigned by the user before the unit is net-
work operational.
See Setting Network Address page 57, for instructions on how to enter
the IP address.
The IP Address consists of a 32-bit number divided into four 8-bit fields.
Each field is expressed as a decimal number from 1 to 255 with each
field separated by periods. This is referred to as “dotted decimal” nota-
tion. For example, 192.16.9.52 is an IP address.
Ask your network administrator to assign you an IP Address, or if the
DNH will be in a closed plant area and not connected to the Internet you
can select an address from Table 3-1.
192.165.0.1
192.165.0.2
192.165.0.3
192.165.0.4
192.165.0.5
192.165.0.6
192.165.0.7
192.165.0.8
192.165.0.9
192.165.0.10
192.165.0.11
192.165.0.12
192.165.0.13
192.165.0.14
192.165.0.15
192.165.0.16
192.165.0.17
192.165.0.18
192.165.0.19
192.165.0.254
192.165.1.254
192.165.2.254
192.165.3.1 - 192.165.3.254
Overview
IP Address
How to Assign an IP
Address
Table 3-1. Available IP
Addresses
