Siemens A80672 Installation & Operation Manual Download Page 33

Page: 33 / 128

INSTALLATION AND CONFIGURATION

_______________________________________________________________________________________________________________

3-7

SIG-00-13-12 February 2021
Version No.: B

3.2.2 Installing the PTC Console to the Rack Assembly

The PTC Console optional Mounting Bracket is designed to mount the console between the relay rack rails.

Mount the console using the following procedure:

1.  Align the Mounting Bracket with the Relay Rack rails.
2.  Use ¼-20 bolts and flat washers and slide through the holes in the mounting bracket and the rack rail.
3.  Secure the bolts using a flat washer, a lock washer, and a ¼-20 nut.

Figure 3-7 Mounting the PTC Console to a Rack Assembly

Summary of Contents for A80672

































































































































Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands

Siemens A80672, Installation & Operation Manual

Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands